{"title":"BSI Bob Smith Ind Adhesives - W","description":"","products":[{"product_id":"102-insta-cure-cyanoacrylate-glue-super-thin-cures-1-3-seconds-1-oz","title":"102 Insta-cure Cyanoacrylate Glue | Super Thin | Cures 1-3 seconds | 1 oz.","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eInsta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814635634974,"sku":"BSI102","price":5.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/Screenshot_2025-01-04_at_2.34.48PM__99190.1736019540.1280.1280.png?v=1777932795"},{"product_id":"103-insta-cure-cyanoacrylate-glue-super-thin-cures-1-3-seconds-2-oz","title":"103 Insta-cure Cyanoacrylate Glue | Super Thin | Cures 1-3 seconds | 2 oz.","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eInsta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814636126494,"sku":"BSI103","price":10.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/Screenshot_2025-01-04_at_2.41.12PM__84112.1736019737.1280.1280.png?v=1777932805"},{"product_id":"insta-cure-cyanoacrylate-glue-gap-filling-5-15-seconds","title":"Insta-Cure + Cyanoacrylate Glue | Gap Filling | 5-15 seconds","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eInsta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1\" separations on one surface, then assemble the parts, letting the pressure spread the CA out.\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"BSI-106 1\/2 oz (14.2 g)","offer_id":51814636388638,"sku":"BSI106","price":4.05,"currency_code":"USD","in_stock":true},{"title":"BSI-107 1 oz. (28.4 g)","offer_id":51814636421406,"sku":"BSI107","price":5.95,"currency_code":"USD","in_stock":true},{"title":"BSI-133H 1 oz. (28.4 g)","offer_id":51814636454174,"sku":"BSI133H","price":6.85,"currency_code":"USD","in_stock":true},{"title":"BSI-108 2 oz. (56.8 g)","offer_id":51814636486942,"sku":"BSI108","price":10.25,"currency_code":"USD","in_stock":true},{"title":"BSI-109 8 oz. (227 g)","offer_id":51814636519710,"sku":"BSI109","price":30.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/instacure__25402x__16304.1736035524.1280.1280.jpg?v=1777932816"},{"product_id":"115-ic-gel-paste-cyanoacrylate-paste-50g","title":"115 IC-Gel Paste | cyanoacrylate paste | 50g","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIC-GEL™ is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as MAXI-CURE™. IC-GEL™, however, can be applied to a vertical surface and will stay in place. It will not run. This can be very convenient for some assembly applications. Applying CA to the bottom of a horizontal surface, such as a ceiling, can be very difficult with anything other than a full standard CA bottle. IC-GEL™ can be applied at any angle with just a squeeze of the tube. The gel does, however, have a tendency to continue to come out of the tube for about a second after pressure is released, so this must be taken into account to apply the exact amount of IC-GEL™ that you want.\u003c\/p\u003e \u003cp\u003eIC-GEL™ is an excellent putty for plastic models. It will fill any void and can be formed to many shapes. Applying INSTA-SET™ allows IC-GEL™ to be sanded or filed to final shape in less than 20 seconds. Autobody repairmen have finished their jobs in a fraction of the time by using IC-GEL™ with the additional advantage over normal body putties of superior bonding to metal surfaces.\u003c\/p\u003e \u003cp\u003eIC-GEL's™ most popular application is for the bonding of fragments of live coral (frags) to underwater rocks in aquariums. It has proven to be non-toxic to aquatic organisms and provides instant bonding for the propagation of the coral. IC-Gel has a superior shelf life of over three years and its application nozzle makes it the easiest of all CAs to apply.\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814640058654,"sku":"BSI115","price":11.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/BSI_ICGEL_25402x__41515.1736023756.1280.1280.jpg?v=1777932824"},{"product_id":"116-ic-gel-paste-cyanoacrylate-paste-20g","title":"116 IC-Gel Paste | cyanoacrylate paste | 20g","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIC-GEL™ is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as MAXI-CURE™. IC-GEL™, however, can be applied to a vertical surface and will stay in place. It will not run. This can be very convenient for some assembly applications. Applying CA to the bottom of a horizontal surface, such as a ceiling, can be very difficult with anything other than a full standard CA bottle. IC-GEL™ can be applied at any angle with just a squeeze of the tube. The gel does, however, have a tendency to continue to come out of the tube for about a second after pressure is released, so this must be taken into account to apply the exact amount of IC-GEL™ that you want.\u003c\/p\u003e \u003cp\u003eIC-GEL™ is an excellent putty for plastic models. It will fill any void and can be formed to many shapes. Applying INSTA-SET™ allows IC-GEL™ to be sanded or filed to final shape in less than 20 seconds. Autobody repairmen have finished their jobs in a fraction of the time by using IC-GEL™ with the additional advantage over normal body putties of superior bonding to metal surfaces.\u003c\/p\u003e \u003cp\u003eIC-GEL's™ most popular application is for the bonding of fragments of live coral (frags) to underwater rocks in aquariums. It has proven to be non-toxic to aquatic organisms and provides instant bonding for the propagation of the coral. IC-Gel has a superior shelf life of over three years and its application nozzle makes it the easiest of all CAs to apply.\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814640288030,"sku":"BSI116","price":6.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/BSI_ICGEL_25402x__50630.1736023784.1280.1280.jpg?v=1777932831"},{"product_id":"117-ic-2000-rubber-toughened-ca-black-1-2-oz","title":"117 IC-2000 Rubber Toughened CA | Black | 1\/2 Oz","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIC-2000™ is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber and other advanced materials. For model use, IC-2000™ is ideal for the bonding of bulkheads, formers and servo rails to the inside of fiberglass hulls and fuselages. Setup time is 20-40 seconds, which can be accelerated with INSTA-SET™. When cured, IC-2000™ is pliable enough to be carved with a hobby knife. IC-2000™ is the best adhesive for R\/C car tires.\u003c\/p\u003e \u003cp\u003eIC-2000™ has found many uses in industrial applications, such as rubber to rubber bonding by Beechcraft, carbon composite bonding by Boeing, rubber door seals by Volkswagen, speaker and subwoofer assembly in the audio industry and many others that need the most durable, shock resistant fast bonding adhesive that is available.\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814640582942,"sku":"BSI117","price":6.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/Screenshot_2025-01-04_at_3.51.28PM__03753.1736024052.1280.1280.png?v=1777932840"},{"product_id":"119-insta-flex-flexible-thin-low-odor-1-oz","title":"119 Insta-Flex | Flexible Thin | Low Odor | 1 oz","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eInsta-Flex™ flexible thin CA is ideal for many applications, including the installation of CA hinges. When cured, INSTA-FLEX™ does not turn brittle and remains clear, even if accelerated with INSTA-SET™. It has superior shock resistance. Although not as thin in consistency as INSTA-CURE™, INSTA-FLEX™ still has good penetrating qualities and its application can be easier to control. For CA hinges, we recommend drilling a 1\/16\" hole in the center of the hinge slots to insure the complete saturation of the hinge when INSTA-FLEX™ is applied. INSTA-FLEX™ has a different, less irritating odor compared to regular CA's, but still can not be used on white foam. INSTA-FLEX™ has also proven to be superior when bonding anodized aluminum.\u003c\/span\u003e\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814641008926,"sku":"BSI119","price":10.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/BSI_instaflex_25402x__89961.1736032783.1280.1280.jpg?v=1777932849"},{"product_id":"120-insta-flex-clear-gap-filling-rubber-toughened-1-oz","title":"120 Insta-Flex+ | Clear | Gap Filling | Rubber Toughened | 1 oz","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eInsta-Flex+™ clear rubber toughened has similar qualities to our black IC-2000™ but can be used in applications where you do not want the adhesive to be seen. The carbon component of IC-2000™ that gives the CA its black color also contributes to its unsurpassed strength. Since INSTA-FLEX+™ has this carbon removed, its strength is a little less than IC-2000™ but still superior to standard CA's. When esthetics are important and a flexible bond is required, INSTA-FLEX+™ is your best choice. It forms superior bonds to soft urethane and vinyl plastics. Both INSTA-FLEX™ and INSTA-FLEX+™ work well when bonding R\/C car tires. When a joint has a larger than normal gap, flexible CA's provide superior shock resistent bonds.\u003c\/span\u003e\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814641271070,"sku":"BSI120","price":9.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/BSI_Instaflex__25402x__11489.1736034692.1280.1280.jpg?v=1777932856"},{"product_id":"121-super-gold-cyanoacrylate-glue-foam-safe-odorless-thin-1-2-oz","title":"121 Super-Gold Cyanoacrylate Glue | Foam Safe | Odorless | Thin | 1\/2 oz","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSUPER-GOLD™ Thin and SUPER-GOLD+™ gap filling medium thickness are our odorless foam safe CAs. They are non-frosting and take only 2 or 3 seconds longer to bond compared to Insta-Cure and Insta-Cure+. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814641500446,"sku":"BSI121","price":8.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/super_gold_25402x__77366.1736026119.1280.1280.jpg?v=1777932864"},{"product_id":"122-super-gold-cyanoacrylate-glue-foam-safe-odorless-thin-1-oz","title":"122 Super-Gold Cyanoacrylate Glue | Foam Safe | Odorless | Thin | 1 oz","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSUPER-GOLD™ Thin and SUPER-GOLD+™ gap filling medium thickness are our odorless foam safe CAs. They are non-frosting and take only 2 or 3 seconds longer to bond compared to Insta-Cure and Insta-Cure+. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814641860894,"sku":"BSI122","price":16.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/super_gold_25402x__13566.1736026149.1280.1280.jpg?v=1777932874"},{"product_id":"123-super-gold-cyanoacrylate-glue-foam-safe-odorless-thin-2-oz","title":"123 Super-Gold Cyanoacrylate Glue | Foam Safe | Odorless | Thin | 2 oz","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSUPER-GOLD™ Thin and SUPER-GOLD+™ gap filling medium thickness are our odorless foam safe CAs. They are non-frosting and take only 2 or 3 seconds longer to bond compared to Insta-Cure and Insta-Cure+. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814642155806,"sku":"BSI123","price":28.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/super_gold_25402x__43079.1736026175.1280.1280.jpg?v=1777932884"},{"product_id":"ultra-cure-tire-glue-1-oz","title":"Ultra-Cure Tire Glue | 1 Oz","description":"\u003cp\u003e\u003cspan\u003eUltra-Cure™ is a very high performance clear cyanoacrylate that has a viscosity (thickness) in-between that of Insta-Cure Super Thin and Insta-Cure+ Gap Filling Medium. It is ideal for the mounting of rubber tires onto R\/C car wheels. It is available in our 3\/4 oz Pocket CA bottle and comes with one of our new #304 Extender Tips for the Pocket CA pin-in-cap top. ULTRA-CURE™ can be used in many other applications that require a slightly thicker thin CA and will bond virtually everything. It is not foam-safe, however.\u003c\/span\u003e\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814642483486,"sku":"BSI129","price":10.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/s-l1600__63521.1741284000.1280.1280.jpg?v=1777932893"},{"product_id":"131-insta-cure-pocket-ca-super-thin-3-4-oz","title":"131 Insta-Cure | Pocket CA | Super Thin | 3\/4 Oz","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003ePocket CAs are available in 3\/4 \u0026amp; 4 oz. sizes and feature a top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. This pin also helps prevent the clogging of the nozzle. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. BSI's #304 extender tip can be used on the nozzle for finer applications. The Pocket CAs are available with BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+.\u003c\/span\u003e\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814642680094,"sku":"BSI131","price":5.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/pocket_ca_02r_25402x__24713.1736028966.1280.1280.jpg?v=1777932901"},{"product_id":"131h-insta-cure-super-glue-super-thin-1-oz","title":"131H Insta-Cure Super Glue | Super Thin | 1 oz","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eInsta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.\u003c\/span\u003e\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814642975006,"sku":"BSI131H","price":6.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/insta_cure_25402x__10349.1736028028.1280.1280.jpg?v=1777932909"},{"product_id":"133-insta-cure-pocket-ca-gap-filling-3-4-oz","title":"133 Insta-Cure | Pocket CA | Gap Filling | 3\/4 oz","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003ePocket CAs are available in 3\/4 \u0026amp; 4 oz. sizes and feature a top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. This pin also helps prevent the clogging of the nozzle. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. BSI's #304 extender tip can be used on the nozzle for finer applications. The Pocket CAs are available with BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+.\u003c\/span\u003e\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814643204382,"sku":"BSI133","price":5.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/pocket_ca_02r_25402x__10363.1736029122.1280.1280.jpg?v=1777932917"},{"product_id":"135h-maxi-cure-super-glue-extra-thick-1-oz","title":"135H Maxi-Cure Super Glue | Extra Thick | 1 oz","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMaxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE™ bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, clothtextured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE™ or any other adhesive. It also is best for bonding the tires for R\/C cars.\u003c\/p\u003e \u003cp\u003eMAXI-CURE™ has proven to be very popular in the archery business for the fletching of vanes onto aluminum and carbon arrow shafts. Along with being the strongest, MAXI-CURE™ is usually the least expensive option for this application.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814643368222,"sku":"BSI135H","price":6.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/maxi_cure_25402x__12748.1736028148.1280.1280.jpg?v=1777932924"},{"product_id":"139-super-gold-pocket-ca-odorless-3-4-oz","title":"139 Super-Gold+ | Pocket CA | Odorless | 3\/4 oz","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003ePocket CAs are available in 3\/4 \u0026amp; 4 oz. sizes and feature a top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. This pin also helps prevent the clogging of the nozzle. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. BSI's #304 extender tip can be used on the nozzle for finer applications. The Pocket CAs are available with BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+.\u003c\/span\u003e\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814643532062,"sku":"BSI139","price":12.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/pocket_ca_02r_25402x__92079.1736029268.1280.1280.jpg?v=1777932932"},{"product_id":"super-gold-cyanoacrylate-glue-foam-safe-odorless-gap-filling","title":"Super-Gold+ Cyanoacrylate Glue | Foam Safe | Odorless | Gap Filling","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eSuper-Gold+™ is foam-safe, odorless super glue. Super glues can produce fumes that can be irritating to the eyes and nose. While not toxic, some people can become sensitized to these fumes. Super-Gold+™ is BSI’s odorless form of Cyanoacrylate that gives the same high performance characteristics as BSI’s Insta-Cure+ without the irritating fumes. Super-Gold+ will not fog clear plastic and glass, which can occur with the use of standard Cyanoacrylates. It can also be used on all foams. The cost may be higher, but the added benefits make Super-Gold+ the best quality adhesive for the consumer.\u003c\/span\u003e\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"BSI-126 1\/2 oz (14.2 g)","offer_id":51814643794206,"sku":"BSI126","price":8.55,"currency_code":"USD","in_stock":true},{"title":"BSI-139H 1 oz (28.4 g)","offer_id":51814643826974,"sku":"BSI139H","price":16.95,"currency_code":"USD","in_stock":true},{"title":"BSI-127 1 oz (28.4 g)","offer_id":51814643859742,"sku":"BSI127","price":16.15,"currency_code":"USD","in_stock":true},{"title":"BSI-128 2 oz (56.8 g)","offer_id":51814643892510,"sku":"BSI128","price":28.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/super_gold_plus_25402x__78971.1736034342.1280.1280.jpg?v=1777932942"},{"product_id":"foam-cure-flexible-foam-glue-crystal-clear","title":"Foam-Cure | Flexible Foam Glue | Crystal Clear","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eFOAM-CURE™ is a silicone based adhesive that works very well on EPP and EPO foams. It is crystal clear and cures to a more flexible consistency than CA. It is, however, not instant bonding like CA and there is no accelerator to speed it’s curing. To obtain a faster initial bond when bonding two pieces, FOAM-CURE™ can be applied to one piece and after the two are joined, they can then be pulled apart. After letting it air dry for about ten minutes, FOAM-CURE™ will act like a contact cement when the parts are rejoined, resulting in enough tack strength to allow the next steps of assembly. Full strength is reached in 10-12 hours.\u003c\/p\u003e \u003cp\u003eFOAM-CURE™ works with all foams, and will actually bond most other materials. It will bond wood and plastic to foam, and is a good canopy glue. FOAM-CURE™ does not, however, cure flexible enough to act as a hinge for aircraft control surfaces. Its limitations occur when bonding large areas of two non-porous materials. FOAM-CURE™ requires exposure to air for drying. If one tried to bond, for example, a half-dollar coin to glass, over 90% of the adhesive would never cure, since the solvent it contains would have no where to evaporate. A small amount of denatured alcohol can be mixed into the Foam-Cure to make it thinner.\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"1 Fl. oz (30 ml)","offer_id":51814644252958,"sku":"BSI141","price":2.95,"currency_code":"USD","in_stock":true},{"title":"4 Fl. oz (120 ml)","offer_id":51814644285726,"sku":"BSI142","price":5.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/foam_cure_25402x__28061.1736033178.1280.1280.jpg?v=1777932951"},{"product_id":"151-insta-set-ca-accelerator-pump-spray-2-oz","title":"151 Insta-Set CA Accelerator | Pump Spray | 2 oz","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eINSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814644482334,"sku":"BSI151","price":5.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/Screenshot_2025-01-04_at_4.43.14PM__53056.1736027132.1280.1280.png?v=1777932959"},{"product_id":"151h-insta-set-ca-accelerator-2-fl-oz","title":"151H Insta-Set CA Accelerator | 2 fl oz","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eINSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eAfter joining parts with cyanoacrylate (CA, super glue), spray the seams with Insta-Set™ to cure the CA in 8 seconds. A bead of CA can then be applied to the outside and corners of joints before another application of Insta-Set™ to reinforce their strength. Insta-Set™ can also be applied to one part (with CA on the other) before joining for difficult to bond materials. Insta-Set™ is compatible with all surfaces, including clear plastic and all foams. It also is a great cleaning agent for adhesive residue and scuff marks. Store separately from CAs.\u003c\/span\u003e\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814644744478,"sku":"BSI151H","price":6.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/insta_set_25402x__41310.1736026929.1280.1280.jpg?v=1777932966"},{"product_id":"152-insta-set-ca-accelerator-refill-8-oz","title":"152 Insta-Set CA Accelerator | Refill | 8 oz","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eINSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814644973854,"sku":"BSI152","price":11.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/Screenshot_2025-01-04_at_4.43.35PM__10616.1736027253.1280.1280.png?v=1777933005"},{"product_id":"super-fix-filler-1oz","title":"Super-Fix Filler 1Oz","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePhotos and descriptions coming soon, please message us with questions before ordering.\u003c\/strong\u003e\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814646055198,"sku":"BSI158","price":8.55,"currency_code":"USD","in_stock":true}]},{"product_id":"161h-un-cure-debonder-all-super-glues-1-oz","title":"161H Un-Cure Debonder | All Super Glues | 1 oz","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eUN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastics parts with a razor saw is usually the best option.\u003c\/span\u003e\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814646186270,"sku":"BSI161H","price":5.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/uncure_25402x__11142.1736028344.1280.1280.jpg?v=1777933016"},{"product_id":"173-ic-loc-red-thread-lock-med-thick-high-strength-10-ml","title":"173 IC-Loc Red | Thread Lock | Med Thick | High-Strength | 10 ml","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eIC-LOC™ Red is a medium thickness, high strength threadlock that is applied to the threads of fasteners before assembly. Once the IC-LOC Red™ is cured, the fasteners are permanently together and cannot be disassembled. IC-LOC Red™ will maintain its strength up to 490° F.\u003c\/span\u003e\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814646350110,"sku":"BSI173","price":5.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/ic_loc_red_25402x__47221.1736030287.1280.1280.jpg?v=1777933025"},{"product_id":"174-ic-loc-red-thread-lock-med-thick-high-strength-50-ml","title":"174 IC-Loc Red | Thread Lock | Med Thick | High-Strength | 50 ml","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eIC-LOC™ Red is a medium thickness, high strength threadlock that is applied to the threads of fasteners before assembly. Once the IC-LOC Red™ is cured, the fasteners are permanently together and cannot be disassembled. IC-LOC Red™ will maintain its strength up to 490° F.\u003c\/span\u003e\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814646579486,"sku":"BSI174","price":13.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/ic_loc_red_25402x__79401.1736030254.1280.1280.jpg?v=1777933032"},{"product_id":"201-quik-cure-5-minute-2-part-epoxy-4-5-oz","title":"201 Quik-Cure 5 minute 2-Part Epoxy | 4.5 oz","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e4.5 oz combined net wt.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eQUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE™ shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE™ is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CURE™ can be handled after 15 minutes. Full strength is reached in 1 hour.\u003c\/span\u003e\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814646874398,"sku":"BSI201","price":11.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/quikcure_25402x__24464.1736028515.1280.1280.jpg?v=1777933041"},{"product_id":"202-quik-cure-5-minute-2-part-epoxy-9-oz","title":"202 Quik-Cure 5 minute 2-Part Epoxy | 9 oz","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e9 oz. combined net wt.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eQUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE™ shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE™ is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CURE™ can be handled after 15 minutes. Full strength is reached in 1 hour.\u003c\/span\u003e\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814647103774,"sku":"BSI202","price":19.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/quik_cure_25402x__78426.1736029813.1280.1280.jpg?v=1777933048"},{"product_id":"206-slow-cure-30-minute-2-part-epoxy-9-oz","title":"206 Slow-Cure 30 Minute 2-Part Epoxy | 9 oz","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e9 oz combined net wt.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eSLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE™ can be used for bonding if you’re willing to wait overnight. Fillers such as microballoons can be mixed with SLOW-CURE™ and FINISH-CURE™ to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours.\u003c\/span\u003e\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814647365918,"sku":"BSI206","price":19.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/slow_cure_25402x__65716.1736029575.1280.1280.jpg?v=1777933056"},{"product_id":"211-quik-cure-5-minute-2-part-epoxy-13oz","title":"211 Quik-Cure 5 Minute 2-Part Epoxy | 13oz","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e13 oz. combined net wt.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eQUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE™ shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE™ is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CURE™ can be handled after 15 minutes. Full strength is reached in 1 hour.\u003c\/span\u003e\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814647562526,"sku":"BSI211","price":25.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/quik_cure_25402x__38851.1736029901.1280.1280.jpg?v=1777933063"},{"product_id":"212-mid-cure-15-minute-2-part-epoxy-13-oz","title":"212 Mid-Cure 15 Minute 2-Part Epoxy | 13 oz","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e13 oz. combined net wt.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eMID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE™ in most applications. MID-CURE™ is our most flexible epoxy and is ideal for gluing to fiberglass surfaces. Allow 45 minutes before handling parts and 2 hours for full strength.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814647857438,"sku":"BSI212","price":25.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/mid_cure_25402x__85772.1736030032.1280.1280.jpg?v=1777933070"},{"product_id":"213-slow-cure-30-min-2-part-epoxy-13-oz","title":"213 Slow-Cure 30 min 2-Part Epoxy | 13 oz","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e13 oz combined net wt.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eSLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE™ can be used for bonding if you’re willing to wait overnight. Fillers such as microballoons can be mixed with SLOW-CURE™ and FINISH-CURE™ to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours.\u003c\/span\u003e\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814648086814,"sku":"BSI213","price":25.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/slow_cure_25402x__73113.1736029488.1280.1280.jpg?v=1777933078"},{"product_id":"301-extender-tips-for-ca-6pk","title":"301 Extender Tips for CA | 6pk","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eFor use over BSI's standard #312 top. Can be used with all thicknesses of CA except IC-Gel. The flexible tip can be cut to the length and\/or inside diameter that is needed for a particular application.\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814648283422,"sku":"BSI301","price":2.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/extender_tip_th_25402x__27241.1736025451.1280.1280.jpg?v=1777933086"},{"product_id":"302-extra-fine-extender-tips-6pk","title":"302 Extra-Fine Extender Tips | 6pk","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eFor use over the standard #312 top, it allows BSI's thin CAs (Insta-Cure, Insta-Flex and Super-Gold) to be applied a drop at a time. Thin CA tends to run everywhere, so these allow precise application.\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814648545566,"sku":"BSI302","price":2.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/extra_fine_extend_tip_NEW_th_25402x__31713.1736025607.1280.1280.jpg?v=1777933093"},{"product_id":"303-extra-long-extender-tip","title":"303 Extra Long Extender Tip","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eFor use over the standard #312 top, they provide a rigid tip with extended length to get thin and gap filling CA into hard to reach areas. They are very resistant to clogging and can be cleaned by soaking in acetone.\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814648742174,"sku":"BSI303","price":0.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/ex_long_extend_tip_th_25402x__89303.1736025695.1280.1280.jpg?v=1777933101"},{"product_id":"304-pocket-ca-extender-tips-6pk","title":"304 Pocket CA Extender Tips | 6pk","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eFor use with BSI's Pocket CAs. It slips over the tip of the Pocket CA top to allow for finer application of the CA. With the tip, the CA can be applied to confined areas.\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814648938782,"sku":"BSI304","price":2.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/pocket-ca-extender-tip-304_th_25402x__69339.1736025770.1280.1280.jpg?v=1777933109"},{"product_id":"305-ptfe-capillary-tubing-2-ft","title":"305 PTFE Capillary Tubing | 2 ft","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eTwo foot length of tubing can be cut off to any length (usually 2\"). With one end cut at a 45° angle, can be inserted 1\/8\" into Pocket CA top and into #312 top if it is cut down an additional 3\/64\". For thin CA.\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814649168158,"sku":"BSI305","price":2.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/ptfe_tubing_th_25402x__18393.1736021708.1280.1280.jpg?v=1777933117"},{"product_id":"321-ca-applicator-regular-tip-6","title":"321 CA Applicator | Regular Tip | 6\"","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e#321 - Regular Tip Non-clog 6\" long pipette for the application of gap filling and extra-thick CA. CA is sucked up into the applicator by inserting it into an open CA bottle with the bulb at the end compressed, like an eyedropper. Both the 320 and 321 are shown in photo.\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814649364766,"sku":"BSI321","price":0.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/applicators_th_25402x__00645.1736021488.1280.1280.jpg?v=1777933125"},{"product_id":"101-insta-cure-cyanoacrylate-glue-super-thin-cures-1-3-seconds-1-2-oz","title":"101 Insta-cure Cyanoacrylate Glue | Super Thin | Cures 1-3 seconds | 1\/2 oz.","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eInsta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.\u003c\/p\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":"Default Title","offer_id":51814649495838,"sku":"BSI101","price":4.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/Screenshot_2025-01-04_at_2.47.23PM__30908.1736021015.1280.1280.png?v=1777933134"},{"product_id":"ic-loc-blue-med-thick-medium-strength","title":"IC-Loc Blue | Med Thick | Medium Strength","description":"\u003cp\u003e\u003cstrong\u003ePlease visit the INFORMATION page for this Superstore listing.\u003c\/strong\u003e\u003c\/p\u003e \u003cdiv class=\"eight columns\"\u003e \u003cdiv class=\"tab_container\"\u003e \u003cdiv id=\"tab-sample1\" class=\"tab_content\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"twelve columns\"\u003e \u003cp\u003eIC-LOC™ Blue is a medium thickness, medium strength threadlock that is applied to the threads of fasteners before assembly. Once the IC-LOC Blue™ is cured, the fasteners can be disassembled with standard hand tools if required.\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e","brand":"BSI - Bob Smith Industries","offers":[{"title":".34 Fl. oz (10 ml)","offer_id":51814649692446,"sku":"BSI171","price":5.95,"currency_code":"USD","in_stock":true},{"title":"1.69 oz. (50 ml)","offer_id":51814649725214,"sku":"BSI172","price":13.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/ic_loc_blue_252525402x__07201.1736030447.1280.1280__38945.1736032449.1280.1280.jpg?v=1777933143"}],"url":"https:\/\/mountain-subdivision-hobbies-2.myshopify.com\/collections\/bsi-bob-smith-ind-adhesives-w.oembed?page=3","provider":"Mountain Subdivision Hobbies","version":"1.0","type":"link"}