{"title":"Lokpilot 5 Decoders","description":"","products":[{"product_id":"esu-59620-lokpilot-5-dcc-mobile-decoder-8-pin-nem652","title":"59620 LokPilot 5 DCC mobile decoder 8-pin  NEM652","description":"\u003cp\u003eThe LokPilot 5 DCC is the \"twin brother\" of the LokPilot 5. The two share almost all characteristics, however, the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility comes with a cheaper price.\u003c\/p\u003e\r\n\u003cp\u003eLokPilot 5 decoders are offered with all common interfaces.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eModes\u003c\/strong\u003e\u003cbr\u003eThe LokPilot 5 DCC is a \"pure-bred\" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus® the decoders register automatically with a suitable DCC system like the ESU CabControl.\u003c\/p\u003e\r\n\u003cp\u003eThe decoder accepts all DCC programming modes and thanks to RailCom® the CV values ​​can be read on the main track with RailCom equipped DCC systems. For command stations that only program the CVs from 1-255 auxiliary CV registers exist.\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 DCC decoder recognizes the Märklin® braking sections as well as the ZIMO® HLU \/ ZACKCommands or the Lenz® ABC system. Also braking with DCC brake modules or with DC voltageis possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle trainenables automatic commuting between two train stations.\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 DCC decoder can be used on analog DC trains. The top speedcan be set separately.\u003c\/p\u003e\r\n\u003cp\u003eThe decoder switches between the operating modes fully automatically \"on-the-fly\".\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eWe know that you want your locomotives to be as realistic as possible. Therefore we have the LokPilot 5DCC packed with function outputs. Depending on the interface version, each LokPilot offers 5 DCCDecoder at least 10 amplified function outputs with 250mA output current each. In the executionswith PluX22 or 21MTC interface there are 4 outputs to control servos orLogic level outputs added. All-important lighting functions are available. The brightness of each outputcan be set separately. The decoder masters automatic pushing and pullingwhen uncoupling for ROCO®, Krois® and Telex® couplings.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMotor control\u003c\/strong\u003e\u003cbr\u003eThe engine control of the LokPilot 5 DCC has been fundamentally improved again. A variably adjustablePWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors.Operation - The typical “hum” is a thing of the past. The load control now has up to10 CVs which can be adjusted for difficult cases. The unique \"Autotune\" function enablesthe automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to 1.5A of motor current. Enough juice even for older motors.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eOperational safety\u003c\/strong\u003e\u003cbr\u003eOn request, a PowerPack can be fitted to the LokPilot 5 DCC to bridge dirty rail sections.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e\u003cbr\u003eOf course, all function outputs and the motor output are protected against overload.\u003c\/p\u003e\r\n\u003cp\u003eWe want you to enjoy your decoder for as long as possible.\u003c\/p\u003e","brand":"ESU Loksound","offers":[{"title":"Default Title","offer_id":51813785829662,"sku":"ESU59620","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/ESU59620__17899.1615853807.1280.1280.png?v=1777915233"},{"product_id":"esu-59629-lokpilot-5-dcc-mobile-decoder-21mtc-nem660-no-wires-21-pin","title":"59629 LokPilot 5 DCC mobile decoder 21MTC   NEM660   No wires  21 pin","description":"\u003cp\u003eThe LokPilot 5 DCC is the \"twin brother\" of the LokPilot 5. The two share almost all characteristics, however, the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility comes with a cheaper price.\u003c\/p\u003e\r\n\u003cp\u003eLokPilot 5 decoders are offered with all common interfaces.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eModes\u003c\/strong\u003e\u003cbr\u003eThe LokPilot 5 DCC is a \"pure-bred\" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus® the decoders register automatically with a suitable DCC system like the ESU CabControl.\u003c\/p\u003e\r\n\u003cp\u003eThe decoder accepts all DCC programming modes and thanks to RailCom® the CV values ​​can be read on the main track with RailCom equipped DCC systems. For command stations that only program the CVs from 1-255 auxiliary CV registers exist.\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 DCC decoder recognizes the Märklin® braking sections as well as the ZIMO® HLU \/ ZACKCommands or the Lenz® ABC system. Also braking with DCC brake modules or with DC voltageis possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle trainenables automatic commuting between two train stations.\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 DCC decoder can be used on analog DC trains. The top speedcan be set separately.\u003c\/p\u003e\r\n\u003cp\u003eThe decoder switches between the operating modes fully automatically \"on-the-fly\".\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eWe know that you want your locomotives to be as realistic as possible. Therefore we have the LokPilot 5DCC packed with function outputs. Depending on the interface version, each LokPilot offers 5 DCCDecoder at least 10 amplified function outputs with 250mA output current each. In the executionswith PluX22 or 21MTC interface there are 4 outputs to control servos orLogic level outputs added. All-important lighting functions are available. The brightness of each outputcan be set separately. The decoder masters automatic pushing and pullingwhen uncoupling for ROCO®, Krois® and Telex® couplings.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMotor control\u003c\/strong\u003e\u003cbr\u003eThe engine control of the LokPilot 5 DCC has been fundamentally improved again. A variably adjustablePWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors.Operation - The typical “hum” is a thing of the past. The load control now has up to10 CVs which can be adjusted for difficult cases. The unique \"Autotune\" function enablesthe automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to 1.5A of motor current. Enough juice even for older motors.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eOperational safety\u003c\/strong\u003e\u003cbr\u003eOn request, a PowerPack can be fitted to the LokPilot 5 DCC to bridge dirty rail sections.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e\u003cbr\u003eOf course, all function outputs and the motor output are protected against overload.\u003c\/p\u003e\r\n\u003cp\u003eWe want you to enjoy your decoder for as long as possible.\u003c\/p\u003e","brand":"ESU Loksound","offers":[{"title":"Default Title","offer_id":51813785862430,"sku":"ESU59629","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/ESU59629__30295.1590021647.1280.1280.png?v=1777915241"},{"product_id":"esu-59820-lokpilot-5-dcc-micro-decoder-nem652-nmra-8-pin","title":"59820 Lokpilot 5 DCC Micro Decoder - NEM652 - NMRA 8 pin","description":"\u003cp class=\"bodytext\"\u003eThe LokPilot 5 micro DCC is the \"twin\" of the LokPilot 5 micro.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eWith just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a pure DCC Decoder.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThis lack of flexibility is rewarded with a lower price.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eModes\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 micro DCC is a \"pure-bred\" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail¬ComPlus®, the decoders log on to a suitable DCC System fully automatically.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eIt masters all DCC programming command stations. Auxiliary registers exist for DCC systems that can only program CVs from 1-255.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 micro DCC decoder recognizes the Märklin® braking sections as well as ZIMO® HLU \/ ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 DCC decoder can be used on analog DC trains. The maximum speed can be set separately.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe decoder switches between the operating modes fully automatically \"on-the-fly\".\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eWe know that you want your locomotives to be as realistic as possible. Therefore we have the LokPilot 5 micro DCC equipped with an amazing number of function outputs. The variants with 6-pin or 8-pin Wiring harnesses offer 4 amplified function outputs, each with 180mA output current and two logic level outputs. The versions with Next18 or PluX16 interface have a total of 6 amplified outputs and two logic level outputs available. All important lighting effects are available. The brightness of each output can be adjusted separately. The decoder masters automatic pushing and pulling when uncoupling for ROCO®, Krois® and Telex® couplings.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMotor control\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe motor control of the LokPilot 5 micro DCC has been fundamentally improved again. A variable adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors- The typical “hum” is a thing of the past. The load control now has up to 10 CVs  which can be adjusted for difficult cases. The unique \"Autotune\" function enables the automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to .75A of motor current. Enough juice for most motors.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eA PowerPack to bypass dirty track can be fitted to the LokPilot 5 micro.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eOf course, the motor output and the function outputs are against overload protected. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e","brand":"ESU Loksound","offers":[{"title":"Default Title","offer_id":51813795725598,"sku":"ESU59820","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/293ffbdad5__86526.1615854232.1280.1280.jpg?v=1777915724"},{"product_id":"esu-59828-lokpilot-5-micro-dcc-mobile-decoder-next18-interface","title":"59828 LokPilot 5 MICRO DCC Mobile Decoder Next18 interface","description":"\u003cp\u003eThe LokPilot 5 micro DCC is the \"twin\" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a pure DCC Decoder. This lack of flexibility is rewarded with a lower price.\u003c\/p\u003e\r\n\u003cp\u003eLokPilot 5 micro DCC decoders are available with all common interfaces. The variants with Next18 or PluX16 interface are a bit larger with a base area of 13.0mm x 9.2mm, but have 2 additional function outputs.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eModes\u003c\/strong\u003e\u003cbr\u003eThe LokPilot 5 micro DCC is a \"pure-bred\" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail¬ComPlus®, the decoders log on to a suitable DCC System fully automatically.\u003c\/p\u003e\r\n\u003cp\u003eIt masters all DCC programming command stations. Auxiliary registers exist for DCC systems that can only program CVs from 1-255.\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 micro DCC decoder recognizes the Märklin® braking sections as well as ZIMO® HLU \/ ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 DCC decoder can be used on analog DC trains. The maximum speed can be set separately.\u003c\/p\u003e\r\n\u003cp\u003eThe decoder switches between the operating modes fully automatically \"on-the-fly\".\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eWe know that you want your locomotives to be as realistic as possible. Therefore we have the LokPilot 5 micro DCC equipped with an amazing number of function outputs. The variants with 6-pin or 8-pin Wiring harnesses offer 4 amplified function outputs, each with 180mA output current and two logic level outputs. The versions with Next18 or PluX16 interface have a total of 6 amplified outputs and two logic level outputs available. All important lighting effects are available. The brightness of each output can be adjusted separately. The decoder masters automatic pushing and pulling when uncoupling for ROCO®, Krois® and Telex® couplings.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMotor control\u003c\/strong\u003e\u003cbr\u003eThe motor control of the LokPilot 5 micro DCC has been fundamentally improved again. A variable adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors- The typical “hum” is a thing of the past. The load control now has up to 10 CVs which can be adjusted for difficult cases. The unique \"Autotune\" function enables the automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to .75A of motor current. Enough juice for most motors.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003cbr\u003eA PowerPack to bypass dirty track can be fitted to the LokPilot 5 micro.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e\u003cbr\u003eOf course, the motor output and the function outputs are against overload protected. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e","brand":"ESU Loksound","offers":[{"title":"Default Title","offer_id":51813799100702,"sku":"ESU59828","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/s-l1600__92235.1597798096.1280.1280.jpg?v=1777916018"},{"product_id":"esu-59020-lokpilot-5-basic-dcc-mobile-decoder-8-pin-nem652","title":"59020 LokPilot 5 Basic DCC mobile decoder 8-pin  NEM652","description":"\u003cp\u003e\u003cspan style=\"color: #0000ff; background-color: #ffff00;\"\u003e\u003cstrong\u003eBULK PRICING APPLIES - see below\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eWhile LokPilot 5 decoders can undoubtedly meet all imaginable requirements of even the most demanding experts, many model railway eras are looking for a robust, high-quality DCC decoder for your standard requirements, which should also be affordable. The LokPilot 5 Basic was developed with the aim of offering a modern decoder with a reasonable range of functions at a reasonable price. The LokPilot 5 Basic comes in two versions: In addition to a version with an 8-pin NEM interface, a version with 21MTC interface is also available. This makes the LokPilot 5 Basic particularly suitable for use in track H0 vehicles.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eModes\u003c\/strong\u003e\u003cbr\u003eThe LokPilot 5 Basic is a \"pure-bred\" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 20 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully automatically to a suitable digital center.\u003c\/p\u003e\r\n\u003cp\u003eIt masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 Basic Decoder detects the Märklin® brake distances as well as the Lenz® ABC system. Braking with DCC brake blocks or dc voltage is also possible.The LokPilot 5 Basic Decoder can be used on analog DC webs. The maximum speed can be set separately.The decoder switches \"on-the-fly\" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFunctions\u003c\/strong\u003e\u003cbr\u003eThe LokPilot 5 Basic has 4 reinforced function outputs in each version. In the 21MTC interface, there are 8 logic-level outputs at the interface, two of which are also suitable for controlling servos. All important lighting functions are available. The brightness of each output can be set separately.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMotor\u003c\/strong\u003e\u003cbr\u003eThe motor control of the LokPilot 5 Basic delivers up to 0.9A continuous current. A variable PWM clock frequency from 10kHz to 50kHz ensures super-quiet operation, especially for bell anchor motors – The typical \"hum\" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique \"Autotune\" function allows the decoder to be automatically measured against the motor.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eOperational reliability\u003c\/strong\u003e\u003cbr\u003eOn request, a PowerPack can be connected to the LokPilot 5 Basic to bridge dirty rail cuts.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e\u003cbr\u003eOf course, all function outputs as well as the motor output are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e","brand":"ESU Loksound","offers":[{"title":"Default Title","offer_id":51813822824734,"sku":"ESU59020","price":23.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/59020__32055.1615851854.1280.1280.jpg?v=1777916990"},{"product_id":"esu-59029-lokpilot-5-basic-dcc-mobile-decoder-21-pin-nem660","title":"59029 LokPilot 5 Basic DCC mobile decoder 21-pin  NEM660","description":"\u003cp\u003e\u003cspan style=\"color: #0000ff; background-color: #ffff00;\"\u003e\u003cstrong\u003eBULK PRICING ON THIS ITEM \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eWhile LokPilot 5 decoders can undoubtedly meet all imaginable requirements of even the most demanding experts, many model railway eras are looking for a robust, high-quality DCC decoder for your standard requirements, which should also be affordable. The LokPilot 5 Basic was developed with the aim of offering a modern decoder with a reasonable range of functions at a reasonable price. The LokPilot 5 Basic comes in two versions: In addition to a version with an 8-pin NEM interface, a version with 21MTC interface is also available. This makes the LokPilot 5 Basic particularly suitable for use in track H0 vehicles.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eModes\u003c\/strong\u003e\u003cbr\u003eThe LokPilot 5 Basic is a \"pure-bred\" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 20 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully automatically to a suitable digital center.\u003c\/p\u003e\r\n\u003cp\u003eIt masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 Basic Decoder detects the Märklin® brake distances as well as the Lenz® ABC system. Braking with DCC brake blocks or dc voltage is also possible.The LokPilot 5 Basic Decoder can be used on analog DC webs. The maximum speed can be set separately.The decoder switches \"on-the-fly\" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFunctions\u003c\/strong\u003e\u003cbr\u003eThe LokPilot 5 Basic has 4 reinforced function outputs in each version. In the 21MTC interface, there are 8 logic-level outputs at the interface, two of which are also suitable for controlling servos. All important lighting functions are available. The brightness of each output can be set separately.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMotor\u003c\/strong\u003e\u003cbr\u003eThe motor control of the LokPilot 5 Basic delivers up to 0.9A continuous current. A variable PWM clock frequency from 10kHz to 50kHz ensures super-quiet operation, especially for bell anchor motors – The typical \"hum\" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique \"Autotune\" function allows the decoder to be automatically measured against the motor.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eOperational reliability\u003c\/strong\u003e\u003cbr\u003eOn request, a PowerPack can be connected to the LokPilot 5 Basic to bridge dirty rail cuts.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e\u003cbr\u003eOf course, all function outputs as well as the motor output are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e","brand":"ESU Loksound","offers":[{"title":"Default Title","offer_id":51813822890270,"sku":"ESU59029","price":23.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/59029__95209.1615851939.1280.1280.jpg?v=1777916998"},{"product_id":"esu-59120-lokpilot-5-fx-micro-dcc-8-pin-nem652","title":"59120 LokPilot 5 FX Micro DCC 8-pin NEM652","description":"\u003cp\u003eThe LokPilot 5 Fx micro and its “twin” LokPilot 5 Fx micro DCC is an extremely small function decoder with a footprint of only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor:2.9 mm). It is used in all vehicles of nominal sizes N to H0 that \u003cspan style=\"text-decoration: underline;\"\u003edo not need a motor output,\u003c\/span\u003e but should still be able to switch lighting effects. LokPilot 5 Fx micro decoders are always offered with an 8-pin interface.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eModes\u003c\/strong\u003e\u003cbr\u003eThe LokPilot 5 Fx DCC “only” speaks the DCC protocol, but can also do it automatically with RailComPlus®On RailComPlus command stations.The LokPilot 5 Fx micro decoder recognizes the Märklin® braking distances as well as the ZIMO® HLU \/ ZACKCommands or the Lenz® ABC system. Also braking with DCC brake modules or with DC voltage is possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two train stations. This is also with a function decoder is important in order to be able to synchronize control cars and motor vehicles.The LokPilot 5 Fx decoder can be used on analog DC railways.The decoder switches between the operating modes fully automatically \"on-the-fly\".\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eThe LokPilot 5 Fx micro or LokPilot 5 Fx micro DCC has been equipped with an astonishing number of function outputs. There are 6 amplified function outputs with 180mA output current each and two logic level outputs for servos or Susi. The brightness of each output can be adjusted separately.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eOperational safety\u003c\/strong\u003e\u003cbr\u003eIf required, a PowerPack can be connected to the LokPilot 5 Fx micro and LokPilot 5 Fx micro DCC to bridge dirty rail sections.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e\u003cbr\u003eOf course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e","brand":"ESU Loksound","offers":[{"title":"Default Title","offer_id":51813822923038,"sku":"ESU59120","price":30.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/title_LP_LokPilot-5-Fx-micro_01__25542.1615852397.1280.1280.jpg?v=1777917004"},{"product_id":"esu-59220-lokpilot-5-fx-dcc-8-pin-nem652-function-only","title":"59220 LokPilot 5 FX DCC 8-pin NEM652 - Function Only","description":"\u003cp\u003e\u003cspan style=\"background-color: #ffff00; color: #ff0000;\"\u003e\u003cstrong\u003e\u003cstrong\u003eFUNCTION ONLY - NO motor, NO sound - Lighting ONLY!\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 Fx DCC is a function decoder without motor output and is therefore perfect for installation in control cars or function models. As the \"twin brother\" of the LokPilot 5 Fx, it shares its characteristics and also the basic characteristics of all other LokPilot 5 decoders, but is a pure DCC decoder. The LokPilot 5 Fx DCC is supplied in three variants: In addition to the \"classic\" version with 8-pole NEM 652 wiring harness, a variant for the 21MTC interface and with PluX22 interface is also available.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eModes\u003c\/strong\u003e\u003cbr\u003eThe LokPilot 5 Fx DCC is a \"pure-bred\" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders register fully automatically at a suitable digital center.\u003c\/p\u003e\r\n\u003cp\u003eIt masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 Fx DCC decoder detects the Märklin® brake distances as well as ZIMO® HLU \/ ZACK commands or the Lenz® ABC system. Braking with DCC brake blocks or with equal voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An automatic ABC pen train allows automatic commuting between two stations. Although this de-coder does not have an engine output, this is also important for a function decoder in order to be able to synchronize control cars and motor cars.\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 Fx DCC decoder can be used on analog DC webs.\u003c\/p\u003e\r\n\u003cp\u003eThe decoder switches \"on-the-fly\" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFunctions\u003c\/strong\u003e\u003cbr\u003eThe LokPilot 5 Fx DCC has been equipped with an astonishing number of function outputs. Depending on the cutting position design, each LokPilot 5 Fx DCC decoder offers at least 10 reinforced function outputs with 250mA output current each. For the versions with PluX22 or 21MTC interface, 4 outputs are added for controlling servos or logic level outputs. All important light radios are available. The brightness of each output can be set separately.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eInteraction\u003c\/strong\u003e\u003cbr\u003eThe LokPilot 5 Fx DCC is designed for interaction with the LokSound 5 and the LokPilot 5 decoders: for example, it is possible to equip the locomotive of a multiple unit with a LokSound 5 decoder and the control car with a LokPilot 5 Fx DCC. Provided the same address, both behave absolutely identically. The identical arrangement of the CVs facilitates the tuning of the two decoders.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eOperational reliability\u003c\/strong\u003e\u003cbr\u003eOn request, a PowerPack can be connected to the LokPilot 5 Fx DCC to bridge dirty rail cuts.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e\u003cbr\u003eOf course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e","brand":"ESU Loksound","offers":[{"title":"Default Title","offer_id":51813822988574,"sku":"ESU59220","price":22.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/59220__69387.1615852816.1280.1280.jpg?v=1777917011"},{"product_id":"esu-59229-lokpilot-5-fx-dcc-21-pin-nem660-21mtc-function-only","title":"59229 LokPilot 5 FX DCC 21-pin NEM660 21MTC - Function Only","description":"\u003cp\u003e\u003cspan style=\"color: #ff0000; background-color: #ffff00;\"\u003e\u003cstrong\u003eFUNCTION ONLY - NO motor, NO sound - Lighting ONLY!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 Fx DCC is a function decoder without motor output and is therefore perfect for installation in control cars or function models. As the \"twin brother\" of the LokPilot 5 Fx, it shares its characteristics and also the basic characteristics of all other LokPilot 5 decoders, but is a pure DCC decoder. The LokPilot 5 Fx DCC is supplied in three variants: In addition to the \"classic\" version with 8-pole NEM 652 wiring harness, a variant for the 21MTC interface and with PluX22 interface is also available.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eModes\u003c\/strong\u003e\u003cbr\u003eThe LokPilot 5 Fx DCC is a \"pure-bred\" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders register fully automatically at a suitable digital center.\u003c\/p\u003e\r\n\u003cp\u003eIt masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 Fx DCC decoder detects the Märklin® brake distances as well as ZIMO® HLU \/ ZACK commands or the Lenz® ABC system. Braking with DCC brake blocks or with equal voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An automatic ABC pen train allows automatic commuting between two stations. Although this de-coder does not have an engine output, this is also important for a function decoder in order to be able to synchronize control cars and motor cars.\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 Fx DCC decoder can be used on analog DC webs.\u003c\/p\u003e\r\n\u003cp\u003eThe decoder switches \"on-the-fly\" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFunctions\u003c\/strong\u003e\u003cbr\u003eThe LokPilot 5 Fx DCC has been equipped with an astonishing number of function outputs. Depending on the cutting position design, each LokPilot 5 Fx DCC decoder offers at least 10 reinforced function outputs with 250mA output current each. For the versions with PluX22 or 21MTC interface, 4 outputs are added for controlling servos or logic level outputs. All important light radios are available. The brightness of each output can be set separately.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eInteraction\u003c\/strong\u003e\u003cbr\u003eThe LokPilot 5 Fx DCC is designed for interaction with the LokSound 5 and the LokPilot 5 decoders: for example, it is possible to equip the locomotive of a multiple unit with a LokSound 5 decoder and the control car with a LokPilot 5 Fx DCC. Provided the same address, both behave absolutely identically. The identical arrangement of the CVs facilitates the tuning of the two decoders.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eOperational reliability\u003c\/strong\u003e\u003cbr\u003eOn request, a PowerPack can be connected to the LokPilot 5 Fx DCC to bridge dirty rail cuts.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e\u003cbr\u003eOf course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e","brand":"ESU Loksound","offers":[{"title":"Default Title","offer_id":51813823021342,"sku":"ESU59229","price":22.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/59229__64175.1615852889.1280.1280.jpg?v=1777917019"},{"product_id":"esu-59610-lokpilot-5-dcc-mm-sx-m4-mobile-decoder-8-pin-nem652","title":"59610 LokPilot 5 DCC\/MM\/SX\/M4 mobile decoder 8-pin  NEM652","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFrom ESU:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of gauge H0 and 0.\u003cbr\u003eLokPilot 5 decoders are offered with all common interfaces.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eModes\u003c\/strong\u003e\u003cbr\u003eThe LokPilot 5 is a real multi-protocol decoder. He masters the data format DCC as well as Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically.\u003cbr\u003eIt masters all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control centers. Auxiliary registers exist for control centers that can only program CVs from 1-255.\u003cbr\u003eMotorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.\u003cbr\u003eThe M4 protocol enables automatic registration at mfx®-compatible control centers. All 32 possible function keys are offered here.\u003cbr\u003eThe LokPilot 5 decoder recognizes the Märklin® braking distances as well as ZIMO® HLU \/ ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.\u003cbr\u003eThe LokPilot 5 decoder can be used on analog DC and AC railways.The decoder switches between the operating modes fully automatically \"on-the-fly\". Usually nothing needs to be set.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eWe know that you want your locomotives to be as realistic as possible. Therefore, we packed the LokPilot 5 with function outputs. Depending on the interface version, each LokPilot 5 decoder offers at least 10 amplified function outputs with 250mA output current each. In the versions with PluX22 or 21MTC interface, 4 outputs are added to control servos or logic level outputs. All important lighting functions are available. The brightness of each output can be set separately. The decoder masters the automatic pressing and detaching when uncoupling for ROCO®, Krois® and Telex® couplings.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMotor control\u003c\/strong\u003e\u003cbr\u003eThe engine control of the LokPilot 5 has been fundamentally improved again. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors - the typical \"hum\" is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique \"Autotune\" function enables the decoder to be automatically calibrated to the motor. With up to 1.5A motor current, the LokPilot 5 decoder provides enough juice even for older motors.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eOperational safety\u003c\/strong\u003e\u003cbr\u003eA PowerPack can be connected to the LokPilot 5 to bridge dirty rail sections.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e\u003cbr\u003eOf course, all function outputs and the motor output are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e","brand":"ESU Loksound","offers":[{"title":"Default Title","offer_id":51813897535774,"sku":"ESU59610","price":33.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/71fe5f3528__82955.1668798571.1280.1280.jpg?v=1777918109"},{"product_id":"esu-59817-lokpilot-5-micro-dcc-mm-sx-6-pin-direct-gauge-n-tt","title":"59817 LokPilot 5 micro DCC\/MM\/SX | 6-pin Direct | gauge N, TT","description":"\u003cp\u003e\u003cem\u003eFrom ESU:\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed circuit boards and the latest manufacturing technology, it is so small with only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm) that it can be used even in very small locomotives Nominal sizes Z, N or TT can accommodate. Nevertheless, functionality and robustness were not spared compared to the larger versions.\u003c\/p\u003e\r\n\u003cp\u003eLokPilot 5 micro decoders are offered with all common interfaces. The versions with Next18 or PluX16 interface are a bit larger with a base area of ​​13.0mm x 9.2mm, but they also speak for the mfx®-compatible M4 protocol.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eModes\u003c\/strong\u003e\u003cbr\u003eThe LokPilot 5 micro is a real multi-protocol decoder. He masters the data format DCC as well as Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically.\u003c\/p\u003e\r\n\u003cp\u003eIt masters all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control centers. Auxiliary registers exist for control centers that can only program CVs from 1-255.\u003c\/p\u003e\r\n\u003cp\u003eMotorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.\u003c\/p\u003e\r\n\u003cp\u003eThe Next18 and PluX16 variants also allow automatic registration to mfx®-compatible control centers thanks to the M4 protocol. All 32 possible function keys are offered here.\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 micro decoder recognizes the Märklin® braking distances as well as ZIMO® HLU \/ ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 decoder can be used on analog DC trains. The versions with Next18 or PluX16 can also be used on analog AC systems. The maximum speed can be set separately.\u003c\/p\u003e\r\n\u003cp\u003eThe decoder switches between the operating modes fully automatically \"on-the-fly\". Usually nothing needs to be set.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eWe know that you want your locomotives to be as realistic as possible. That is why we have equipped the LokPilot 5 micro with an astonishing number of function outputs. The variants with 6-pin or 8-pin wiring harness offer 4 amplified function outputs with 180mA output current each as well as two logic level outputs for servos or Susi. The versions with Next18 or PluX16 interface have a total of 6 amplified outputs and two logic level outputs. All important lighting functions are available. The brightness of each output can be set separately. The decoder masters the automatic pressing and detaching when uncoupling for ROCO®, Krois® and Telex® couplings.\u003cbr\u003emotor control\u003c\/p\u003e\r\n\u003cp\u003eThe engine control of the LokPilot 5 micro has been fundamentally improved again. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors - the typical \"hum\" is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique \"Autotune\" function enables the decoder to be automatically calibrated to the motor. With up to 0.75A motor current, the LokPilot 5 micro decoder provides enough juice for the intended application scenarios.\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eOperational safety\u003c\/strong\u003e\u003cbr\u003eOn request, a PowerPack can be connected to the LokPilot 5 micro to bridge dirty rail sections.\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e\u003cbr\u003eOf course, the motor output and the function outputs are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e","brand":"ESU Loksound","offers":[{"title":"Default Title","offer_id":51813922439454,"sku":"ESU59817","price":32.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/4305edac97__63661.1704057323.1280.1280.jpg?v=1777918971"},{"product_id":"esu-59925-lokpilot-5-nano-dcc-e24-interface","title":"59925 LokPilot 5 Nano DCC E24 Interface","description":"\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFrom ESU:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 Nano DCC is the “twin” of the LokSound 5 Nano DCC. At 19.6 mm x 8.5 mm and a thickness of only 3.2 mm, it is exactly the same size as the corresponding LokSound decoder, but does without the sound functions. The LokPilot 5 Nano DCC is equipped with the E24 interface, which will fit into many newly released N gauge locomotives.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eModes\u003c\/strong\u003e\u003cbr\u003eThe LokPilot 5 Nano DCC is a \"pure-bred\" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders log on to a suitable DCC System fully automatically. It masters all DCC programming command stations. Auxiliary registers exist for DCC systems that can only program CVs from 1-255.\u003cbr\u003eThe LokPilot 5 Nano DCC decoder recognizes the Märklin® braking sections as well as ZIMO® HLU \/ ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.\u003cbr\u003eThe LokPilot 5 Nano DCC decoder can be used on analog DC trains. The maximum speed can be set separately. The decoder switches between the operating modes fully automatically \"on-the-fly\".\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFunctions\u003c\/strong\u003e\u003cbr\u003eDespite its small size, the LokPilot 5 Nano DCC has 8 powered function outputs as well as a 5 logic level outputs provided at the E24 interface. All important lighting functions are available. The brightness of each output can be set separately. The decoder controls the automatic start-up and disconnection when uncoupling for ROCO®, Krois® and Märklin telex ® couplings.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMotor\u003c\/strong\u003e\u003cbr\u003eThe motor control of the LokPilot 5 Nano DCC has a variable PWM clock frequency from 10kHz to 50kHz, which ensures super-quiet operation, especially for bell anchor motors – the typical \"hum\" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique \"Autotune\" function allows the decoder to be automatically measured against the motor. The LokPilot 5 Nano DCC decoder delivers up to 0.75A motor power.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e\u003cbr\u003eOf course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e","brand":"ESU Loksound","offers":[{"title":"Default Title","offer_id":51813940461854,"sku":"ESU59925","price":32.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/title_LP_LokPilot-5-Nano-DCC_01__95472.1711068745.1280.1280.jpg?v=1777919279"},{"product_id":"esu-59827-lokpilot-5-micro-dcc-decoder-nem-651-6-pin-direct-n-tt-scale","title":"59827 LokPilot 5 Micro DCC Decoder | NEM-651 | 6-Pin Direct | N \u0026 TT scale","description":"\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFrom ESU:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 micro DCC is the \"twin\" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a pure DCC Decoder. This lack of flexibility is rewarded with a lower price. LokPilot 5 micro DCC decoders are available with all common interfaces. The variants with Next18 or PluX16 interface are a bit larger with a base area of 13.0mm x 9.2mm, but have 2 additional function outputs.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eModes\u003c\/strong\u003e\u003cbr\u003eThe LokPilot 5 micro DCC is a \"pure-bred\" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail¬ComPlus®, the decoders log on to a suitable DCC System fully automatically.\u003cbr\u003eIt masters all DCC programming command stations. Auxiliary registers exist for DCC systems that can only program CVs from 1-255.\u003cbr\u003eThe LokPilot 5 micro DCC decoder recognizes the Märklin® braking sections as well as ZIMO® HLU \/ ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.\u003cbr\u003eThe LokPilot 5 DCC decoder can be used on analog DC trains. The maximum speed can be set separately.\u003cbr\u003eThe decoder switches between the operating modes fully automatically \"on-the-fly\".\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eWe know that you want your locomotives to be as realistic as possible. Therefore we have the LokPilot 5 micro DCC equipped with an amazing number of function outputs. The variants with 6-pin or 8-pin Wiring harnesses offer 4 amplified function outputs, each with 180mA output current and two logic level outputs. The versions with Next18 or PluX16 interface have a total of 6 amplified outputs and two logic level outputs available. All important lighting effects are available. The brightness of each output can be adjusted separately. The decoder masters automatic pushing and pulling when uncoupling for ROCO®, Krois® and Telex® couplings.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMotor contro\u003c\/strong\u003el\u003cbr\u003eThe motor control of the LokPilot 5 micro DCC has been fundamentally improved again. A variable adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors- The typical “hum” is a thing of the past. The load control now has up to 10 CVs which can be adjusted for difficult cases. The unique \"Autotune\" function enables the automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to .75A of motor current. Enough juice for most motors.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003cbr\u003eA PowerPack to bypass dirty track can be fitted to the LokPilot 5 micro.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e\u003cbr\u003eOf course, the motor output and the function outputs are against overload protected. ESU wants you to enjoy your decoder for as long as possible.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSIZE-INCH (L X W X H): 0.51 x 0.36 x 0.11 in\u003c\/li\u003e\r\n\u003cli\u003eSIZE-METRIC (L X W X H): 13 x 9.2 x 2.9 mm\u003c\/li\u003e\r\n\u003cli\u003eMOTOR CURRENT (CONTINUOUS): 0.75A\u003c\/li\u003e\r\n\u003cli\u003eMOTOR CURRENT (PEAK): 1A\u003c\/li\u003e\r\n\u003cli\u003eFUNCTION CURRENT (MAX): 180mA each\u003c\/li\u003e\r\n\u003cli\u003eNORMAL OUTPUT FUNCTIONS: 6\u003c\/li\u003e\r\n\u003cli\u003eLOGIC-LEVEL FUNCTIONS: 2*\u003c\/li\u003e\r\n\u003cli\u003eSERVO OUTPUT FUNCTIONS: 2*\u003c\/li\u003e\r\n\u003cli\u003eFUNCTION INPUTS: 0\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"ESU Loksound","offers":[{"title":"Default Title","offer_id":51813966971166,"sku":"ESU59827","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/Screenshot_2024-10-26_at_8.01.36PM__01902.1729987317.1280.1280.png?v=1777919720"},{"product_id":"esu-59619-lokpilot-5-standard-multi-protocol-dcc-mm-sx-m4-decoder-21-pin","title":"59619 LokPilot 5 Standard Multi-protocol (DCC\/MM\/SX\/M4) Decoder | 21 Pin","description":"\u003cdiv\u003e\u003cem\u003efrom ESU:\u003c\/em\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThe LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of gauge H0 and 0.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003eLokPilot 5 decoders are offered with all common interfaces. This item is 21-pin NEM660\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eModes\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe LokPilot 5 is a real multi-protocol decoder. He masters the data format DCC as well as Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt masters all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control centers. Auxiliary registers exist for control centers that can only program CVs from 1-255.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMotorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe M4 protocol enables automatic registration at mfx®-compatible control centers. All 32 possible function keys are offered here.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe LokPilot 5 decoder recognizes the Märklin® braking distances as well as ZIMO® HLU \/ ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe LokPilot 5 decoder can be used on analog DC and AC railways.The decoder switches between the operating modes fully automatically \"on-the-fly\". Usually nothing needs to be set.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe know that you want your locomotives to be as realistic as possible. Therefore, we packed the LokPilot 5 with function outputs. Depending on the interface version, each LokPilot 5 decoder offers at least 10 amplified function outputs with 250mA output current each. In the versions with PluX22 or 21MTC interface, 4 outputs are added to control servos or logic level outputs. All important lighting functions are available. The brightness of each output can be set separately. The decoder masters the automatic pressing and detaching when uncoupling for ROCO®, Krois® and Telex® couplings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMotor control\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe engine control of the LokPilot 5 has been fundamentally improved again. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors - the typical \"hum\" is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique \"Autotune\" function enables the decoder to be automatically calibrated to the motor. With up to 1.5A motor current, the LokPilot 5 decoder provides enough juice even for older motors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eOperational safety\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOn request, a PowerPack can be connected to the LokPilot 5 to bridge dirty rail sections.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOf course, all function outputs and the motor output are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDecoder Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cspan\u003eSize: 21.4 mm x 15.5 mm x 4.5 mm  (0.84 in x 0.61 in x 0.18 in)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cspan\u003eInterface: NEM660 21MTC Integral Connector\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cspan\u003eMotor Rating: 1.5A Continuous\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cspan\u003eBEMF: Motor control with 50 kHz clock frequency\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cspan\u003eFunctions:  10 amplified outputs for special functions, 4 Logic-level outputs, 2 Servo Outputs (total: Up to 16 outputs)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cspan\u003eProtocol: DCC with RailComPlus®, M4, Motorola® and Selectrix®\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cspan\u003eAdditional Features:\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eUpdatable with ESU-LokProgrammer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTwo-stage heavy load simulation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3 new, individually adjustable brake controllers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eConnection interface for RC servos and SUSI modules\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOptional optional PowerPack storage capacitor connections\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eInterface\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eNEM660 21MTC Integral Connector\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ESU Loksound","offers":[{"title":"Default Title","offer_id":51814731153694,"sku":"ESU59619","price":32.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/image__49745.1699499184__42805.1740529797.1280.1280.png?v=1777935910"},{"product_id":"esu-59826-lokpilot-5-micro-dcc-decoder-nem-651-6-pin-harness-n-tt-scale","title":"59826 LokPilot 5 Micro DCC Decoder | NEM-651 | 6-Pin harness | N \u0026 TT scale","description":"\u003cp class=\"p2\"\u003e\u003cspan\u003eNEM-651 6-Pin with wired harness\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cem\u003e\u003cstrong\u003eFrom ESU:\u003c\/strong\u003e\u003c\/em\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eThe LokPilot 5 micro DCC is the \"twin\" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a pure DCC Decoder. This lack of flexibility is rewarded with a lower price.\u003c\/div\u003e\n\u003cdiv\u003eLokPilot 5 micro DCC decoders are available with all common interfaces. The variants with Next18 or PluX16 interface are a bit larger with a base area of 13.0mm x 9.2mm, but have 2 additional function outputs.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eModes\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe LokPilot 5 micro DCC is a \"pure-bred\" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail¬ComPlus®, the decoders log on to a suitable DCC System fully automatically.\u003c\/div\u003e\n\u003cdiv\u003eIt masters all DCC programming command stations. Auxiliary registers exist for DCC systems that can only program CVs from 1-255.\u003c\/div\u003e\n\u003cdiv\u003eThe LokPilot 5 micro DCC decoder recognizes the Märklin® braking sections as well as ZIMO® HLU \/ ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.\u003c\/div\u003e\n\u003cdiv\u003eThe LokPilot 5 DCC decoder can be used on analog DC trains. The maximum speed can be set separately.\u003c\/div\u003e\n\u003cdiv\u003eThe decoder switches between the operating modes fully automatically \"on-the-fly\".\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eWe know that you want your locomotives to be as realistic as possible. Therefore we have the LokPilot 5 micro DCC equipped with an amazing number of function outputs. The variants with 6-pin or 8-pin Wiring harnesses offer 4 amplified function outputs, each with 180mA output current and two logic level outputs. The versions with Next18 or PluX16 interface have a total of 6 amplified outputs and two logic level outputs available. All important lighting effects are available. The brightness of each output can be adjusted separately. The decoder masters automatic pushing and pulling when uncoupling for ROCO®, Krois® and Telex® couplings.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eMotor control\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe motor control of the LokPilot 5 micro DCC has been fundamentally improved again. A variable adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors- The typical “hum” is a thing of the past. The load control now has up to 10 CVs  which can be adjusted for difficult cases. The unique \"Autotune\" function enables the automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to .75A of motor current. Enough juice for most motors.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eA PowerPack to bypass dirty track can be fitted to the LokPilot 5 micro.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eOf course, the motor output and the function outputs are against overload protected. We want you to enjoy your decoder for as long as possible.\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ESU Loksound","offers":[{"title":"Default Title","offer_id":51814880018718,"sku":"ESU59826","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/s-l1600__80344.1747699519.1280.1280.jpg?v=1777939203"},{"product_id":"esu-59612-lokpilot-5-dcc-mm-sx-m4-mobile-decoder-plux22-nem658","title":"59612 LokPilot 5 DCC\/MM\/SX\/M4 mobile decoder Plux22  NEM658","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFrom ESU:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of gauge H0 and 0.\u003cbr\u003eLokPilot 5 decoders are offered with all common interfaces.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eModes\u003c\/strong\u003e\u003cbr\u003eThe LokPilot 5 is a real multi-protocol decoder. He masters the data format DCC as well as Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically.\u003cbr\u003eIt masters all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control centers. Auxiliary registers exist for control centers that can only program CVs from 1-255.\u003cbr\u003eMotorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.\u003cbr\u003eThe M4 protocol enables automatic registration at mfx®-compatible control centers. All 32 possible function keys are offered here.\u003cbr\u003eThe LokPilot 5 decoder recognizes the Märklin® braking distances as well as ZIMO® HLU \/ ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.\u003cbr\u003eThe LokPilot 5 decoder can be used on analog DC and AC railways.The decoder switches between the operating modes fully automatically \"on-the-fly\". Usually nothing needs to be set.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eWe know that you want your locomotives to be as realistic as possible. Therefore, we packed the LokPilot 5 with function outputs. Depending on the interface version, each LokPilot 5 decoder offers at least 10 amplified function outputs with 250mA output current each. In the versions with PluX22 or 21MTC interface, 4 outputs are added to control servos or logic level outputs. All important lighting functions are available. The brightness of each output can be set separately. The decoder masters the automatic pressing and detaching when uncoupling for ROCO®, Krois® and Telex® couplings.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMotor control\u003c\/strong\u003e\u003cbr\u003eThe engine control of the LokPilot 5 has been fundamentally improved again. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors - the typical \"hum\" is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique \"Autotune\" function enables the decoder to be automatically calibrated to the motor. With up to 1.5A motor current, the LokPilot 5 decoder provides enough juice even for older motors.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eOperational safety\u003c\/strong\u003e\u003cbr\u003eA PowerPack can be connected to the LokPilot 5 to bridge dirty rail sections.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e\u003cbr\u003eOf course, all function outputs and the motor output are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e","brand":"ESU Loksound","offers":[{"title":"Default Title","offer_id":51814966296862,"sku":"ESU59612","price":33.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/8dfcd4752c__11128.1769803215.1280.1280.jpg?v=1777941523"},{"product_id":"esu-59818-lokpilot-5-micro-dcc-mm-sx-next18-gauge-n-tt","title":"59818 LokPilot 5 micro DCC\/MM\/SX | Next18 | gauge N, TT","description":"\u003cp\u003e\u003cem\u003eFrom ESU:\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed circuit boards and the latest manufacturing technology, it is so small with only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm) that it can be used even in very small locomotives Nominal sizes Z, N or TT can accommodate. Nevertheless, functionality and robustness were not spared compared to the larger versions.\u003c\/p\u003e\r\n\u003cp\u003eLokPilot 5 micro decoders are offered with all common interfaces. The versions with Next18 or PluX16 interface are a bit larger with a base area of ​​13.0mm x 9.2mm, but they also speak for the mfx®-compatible M4 protocol.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eModes\u003c\/strong\u003e\u003cbr\u003eThe LokPilot 5 micro is a real multi-protocol decoder. He masters the data format DCC as well as Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically.\u003c\/p\u003e\r\n\u003cp\u003eIt masters all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control centers. Auxiliary registers exist for control centers that can only program CVs from 1-255.\u003c\/p\u003e\r\n\u003cp\u003eMotorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.\u003c\/p\u003e\r\n\u003cp\u003eThe Next18 and PluX16 variants also allow automatic registration to mfx®-compatible control centers thanks to the M4 protocol. All 32 possible function keys are offered here.\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 micro decoder recognizes the Märklin® braking distances as well as ZIMO® HLU \/ ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.\u003c\/p\u003e\r\n\u003cp\u003eThe LokPilot 5 decoder can be used on analog DC trains. The versions with Next18 or PluX16 can also be used on analog AC systems. The maximum speed can be set separately.\u003c\/p\u003e\r\n\u003cp\u003eThe decoder switches between the operating modes fully automatically \"on-the-fly\". Usually nothing needs to be set.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eWe know that you want your locomotives to be as realistic as possible. That is why we have equipped the LokPilot 5 micro with an astonishing number of function outputs. The variants with 6-pin or 8-pin wiring harness offer 4 amplified function outputs with 180mA output current each as well as two logic level outputs for servos or Susi. The versions with Next18 or PluX16 interface have a total of 6 amplified outputs and two logic level outputs. All important lighting functions are available. The brightness of each output can be set separately. The decoder masters the automatic pressing and detaching when uncoupling for ROCO®, Krois® and Telex® couplings.\u003cbr\u003emotor control\u003c\/p\u003e\r\n\u003cp\u003eThe engine control of the LokPilot 5 micro has been fundamentally improved again. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors - the typical \"hum\" is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique \"Autotune\" function enables the decoder to be automatically calibrated to the motor. With up to 0.75A motor current, the LokPilot 5 micro decoder provides enough juice for the intended application scenarios.\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eOperational safety\u003c\/strong\u003e\u003cbr\u003eOn request, a PowerPack can be connected to the LokPilot 5 micro to bridge dirty rail sections.\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e\u003cbr\u003eOf course, the motor output and the function outputs are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e","brand":"ESU Loksound","offers":[{"title":"Default Title","offer_id":51814966362398,"sku":"ESU59818","price":32.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/files\/906d04c7ae__87889.1769803543.1280.1280.jpg?v=1777941531"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/8069\/9166\/collections\/lokpilot_20logo__50759_6ddb441b-2196-4a39-bd6c-d411c10d9b4c.jpg?v=1778197090","url":"https:\/\/mountain-subdivision-hobbies-2.myshopify.com\/collections\/lokpilot-5-decoders.oembed","provider":"Mountain Subdivision Hobbies","version":"1.0","type":"link"}